Free online formula calculators

Dilution Calculator (C₁V₁ = C₂V₂)

Find how much stock solution to dilute, the final volume, or the resulting concentration using C₁V₁ = C₂V₂. Use any units, as long as they match on both sides.

Dilution Calculator (C₁V₁ = C₂V₂)
M
M
mL
Result
ResultV₁ = 62.5 mL
Solvent to add187.5 mL (dilution factor 4×)
WorkingV₁ = 0.5 × 250 ÷ 2 = 62.5

Link to this calculation

Formula

C1 × V1 = C2 × V2
V1 = C2V2 ÷ C1
SymbolMeaning
C1Concentration of the stock solution
V1Volume of stock solution used
C2Concentration of the diluted solution
V2Final volume of the diluted solution

How to Use This Calculator

  1. Choose the Solve for (Stock volume (V₁), Stock concentration (C₁), Final volume (V₂), Final concentration (C₂)).
  2. Enter the Stock concentration (C₁). Any concentration unit, e.g. M, mg/mL or %.
  3. Enter the Stock volume (V₁) when Solve for is Stock concentration (C₁) or Final volume (V₂) or Final concentration (C₂). Any volume unit, used for both volumes.
  4. Enter the Final concentration (C₂). Same unit as C₁.
  5. Enter the Final volume (V₂). Same unit as V₁.
  6. Press Calculate. Results also update automatically as you type.

Worked Example

Using the values pre-filled in the calculator above:

Inputs
Solve forStock volume (V₁)
Stock concentration (C₁)2 M
Final concentration (C₂)0.5 M
Final volume (V₂)250 mL
Results
ResultV₁ = 62.5 mL
Solvent to add187.5 mL (dilution factor 4×)
WorkingV₁ = 0.5 × 250 ÷ 2 = 62.5

About This Calculation

Diluting a solution adds solvent but leaves the amount of dissolved substance unchanged. Since amount equals concentration times volume, the product C × V is the same before and after: C₁V₁ = C₂V₂. To make 250 mL of 0.5 M acid from a 2 M stock, you need 62.5 mL of stock, made up to 250 mL with 187.5 mL of water.

The equation works with any units provided each pair matches: both concentrations in M, mg/mL or percent, and both volumes in mL or L. The labels here show M and mL, but a calculation in g/L and liters gives the correct answer just the same. The dilution factor, C₁ ÷ C₂, tells you how many times weaker the new solution is; serial dilutions multiply these factors together.

Remember that V₂ is the total final volume, not the volume of water to add; the calculator shows the solvent volume separately. Volumes of some mixtures are not strictly additive (ethanol and water shrink slightly when mixed), so for accurate work fill to the mark in a volumetric flask. When diluting concentrated acids, always add acid to water, not water to acid, because the heat released can make it spatter. For making the stock in the first place, see the molarity calculator.

Frequently Asked Questions

Can I use percent concentrations in C₁V₁ = C₂V₂?
Yes. Any concentration unit works if both C₁ and C₂ use it. Diluting 70% alcohol to 35% halves the concentration and doubles the volume.
What is a dilution factor?
The ratio of the stock concentration to the final concentration (or final to initial volume). A 1:10 dilution, for example 1 mL of stock in 10 mL total, has a dilution factor of 10.
How do I do a serial dilution?
Repeat the same dilution several times, using each new solution as the stock for the next. Three successive 1:10 dilutions give an overall factor of 1,000.

Category: Chemistry. Found a problem with this calculator? Let us know.