Percent Change Calculator
Enter a starting value and an ending value to see the percentage increase or decrease, the absolute change, and the percent difference.
| Percent change | 15.00% |
|---|---|
| Direction | Increase |
| Absolute change | 12 |
| Percent difference | 13.95% |
Link to this calculation – copied!
Formula
Percent difference = |New − Old| ÷ ((|New| + |Old|) ÷ 2) × 100
| Symbol | Meaning |
|---|---|
| Old | The original or starting value |
| New | The final or later value |
How to Use This Calculator
- Enter the Old value. The starting value (the base of the comparison).
- Enter the New value. The value after the change.
- Press Calculate. Results also update automatically as you type.
Worked Example
Using the values pre-filled in the calculator above:
| Old value | 80 |
|---|---|
| New value | 92 |
| Percent change | 15.00% |
|---|---|
| Direction | Increase |
| Absolute change | 12 |
| Percent difference | 13.95% |
About This Calculation
Percent change measures how much a quantity has grown or shrunk relative to where it started. Going from 80 to 92 is a change of 12, and because the starting point was 80, that is a 15% increase. A negative result means a decrease. The old value is always the reference, which is why the order of the inputs matters.
A classic pitfall is that percentage changes are not symmetric. A 20% fall followed by a 20% rise does not get you back where you started: 100 drops to 80, and 20% of 80 is only 16, leaving you at 96. Likewise, a stock that halves needs a 100% gain to recover. When you need a neutral comparison of two values without treating either as the baseline — for example two lab measurements — use the percent difference, which divides by their average instead.
Percent change is used to report price inflation, sales growth, population change, weight loss and test-score improvement. Be careful to distinguish it from a change in percentage points: if an interest rate moves from 4% to 5%, that is a rise of one percentage point but a 25% relative increase. For growth spread over several years, the CAGR calculator gives the equivalent annual rate.
Frequently Asked Questions
- What is the difference between percent change and percent difference?
- Percent change uses the old value as the base and has a direction (increase or decrease). Percent difference compares two values on an equal footing by dividing by their average, so it is always positive and the order does not matter.
- Why can a decrease never be more than 100%?
- A 100% decrease means the value has fallen to zero. A positive quantity cannot fall further than that, whereas increases have no upper limit.
- How do I reverse a percentage increase?
- Divide by (1 + rate) rather than subtracting the same percentage. A price that rose 25% to 150 was originally 150 ÷ 1.25 = 120.