Free online formula calculators

Pressure Calculator

Find the pressure produced by a force spread over an area, or solve for the force or contact area. Uses pascals, newtons and square meters.

Pressure Calculator
N
m²
Result
Result14,000 Pa (14 kPa, 2.03053 psi)
WorkingP = 700 N ÷ 0.05 m² = 14,000 Pa

Link to this calculation

Formula

P = F ÷ A
F = P × A
A = F ÷ P
SymbolMeaning
PPressure, in pascals (Pa = N/m²)
FForce acting perpendicular to the surface, in newtons (N)
AArea over which the force acts, in square meters (m²)

How to Use This Calculator

  1. Choose the Solve for (Pressure (P), Force (F), Area (A)).
  2. Enter the Force (N). 700 N is roughly the weight of a 71 kg person.
  3. Enter the Area (m²). 1 cm² = 0.0001 m².
  4. Enter the Pressure (Pa) when Solve for is Force (F) or Area (A).
  5. Press Calculate. Results also update automatically as you type.

Worked Example

Using the values pre-filled in the calculator above:

Inputs
Solve forPressure (P)
Force700 N
Area0.05 m²
Results
Result14,000 Pa (14 kPa, 2.03053 psi)
WorkingP = 700 N ÷ 0.05 m² = 14,000 Pa

About This Calculation

Pressure is force divided by the area it acts on. The same force can produce very different pressures: a 700 N person standing in flat shoes spread over 0.05 m² exerts about 14 kPa on the floor, but balanced on a stiletto heel of 1 cm² the pressure under the heel rises to around 7 MPa, enough to dent wooden floors. This is also why snowshoes stop you sinking and why knives are sharpened to a fine edge.

The SI unit is the pascal, one newton per square meter. It is a small unit, so kilopascals (kPa) and megapascals (MPa) are common. Standard atmospheric pressure is 101,325 Pa, about 1 bar or 14.7 psi. The calculator shows kPa and psi alongside pascals.

Use the force component perpendicular to the surface and make sure area is in square meters: 1 cm² is 0.0001 m², and forgetting to square the conversion factor is a very common error. Tyre and gauge pressures are usually quoted relative to atmospheric pressure, whereas gas-law calculations need absolute pressure. To change between units, try the pressure converter.

Frequently Asked Questions

What is 1 pascal in everyday terms?
Very little: about the pressure of a sheet of paper resting on a table. Atmospheric pressure is roughly 101,000 Pa.
What is the difference between gauge and absolute pressure?
Gauge pressure is measured relative to the surrounding atmosphere; absolute pressure includes it. Absolute = gauge + about 101.3 kPa at sea level. Gas laws such as the ideal gas law need absolute pressure.
How do I convert cm² to m²?
Divide by 10,000, because 1 m = 100 cm and the conversion is squared. For mm², divide by 1,000,000.

Category: Physics. Found a problem with this calculator? Let us know.