Gear Ratio Calculator
Enter the tooth counts of the driving and driven gears to get the gear ratio, plus the output speed and torque for a given input speed, torque and efficiency.
| Gear ratio | 3:1 (reduction: slower output, more torque) |
|---|---|
| Ratio (driven ÷ driving) | 3.000 |
| Output speed | 600 rpm |
| Output torque | 29.4 N·m |
Link to this calculation – copied!
Formula
nout = nin ÷ ratio
τout = τin × ratio × efficiency
| Symbol | Meaning |
|---|---|
| Tdriving | Number of teeth on the input (driving) gear |
| Tdriven | Number of teeth on the output (driven) gear |
| n | Rotational speed, in rpm |
| τ | Torque, in N·m |
| efficiency | Fraction of power transmitted (about 0.95–0.99 per spur gear stage) |
How to Use This Calculator
- Enter the Driving gear teeth.
- Enter the Driven gear teeth.
- Enter the Input speed (rpm).
- Enter the Input torque (N·m).
- Enter the Efficiency (%). Use 100 for an ideal, lossless gear pair.
- Press Calculate. Results also update automatically as you type.
Worked Example
Using the values pre-filled in the calculator above:
| Driving gear teeth | 12 |
|---|---|
| Driven gear teeth | 36 |
| Input speed | 1,800 rpm |
| Input torque | 10 N·m |
| Efficiency | 98 % |
| Gear ratio | 3:1 (reduction: slower output, more torque) |
|---|---|
| Ratio (driven ÷ driving) | 3.000 |
| Output speed | 600 rpm |
| Output torque | 29.4 N·m |
About This Calculation
When two gears mesh, their teeth pass the contact point at the same rate, so the gear with more teeth turns more slowly. The gear ratio is the number of teeth on the driven gear divided by the number on the driving gear. A 12-tooth pinion driving a 36-tooth gear gives a 3:1 ratio: the output turns at one third of the input speed but with roughly three times the torque.
A ratio above 1 is a reduction, used wherever a fast, low-torque source such as an electric motor or engine must turn something slowly and forcefully: winches, wheels, mixers and robot joints. A ratio below 1 is an overdrive, which raises speed at the expense of torque, as in the top gear of many car gearboxes. Bicycle and chain drives work the same way using sprocket tooth counts.
Power is conserved apart from friction, so speed and torque trade off against each other. Real gear sets lose a little energy: a well-lubricated spur or helical stage is typically 95–99% efficient, while worm gears can be far lower. For a multi-stage gear train, multiply the ratios of each stage together and the efficiencies likewise. Idler gears between two others change the direction of rotation but not the overall ratio.
Frequently Asked Questions
- Does a bigger gear ratio mean more speed or more torque?
- A larger ratio (driven gear bigger than driving gear) gives more torque and less speed at the output.
- How do I calculate the ratio of a gear train?
- Multiply the ratios of each meshing pair. Two stages of 3:1 and 4:1 give an overall 12:1 reduction.
- How do torque and speed relate to power?
- Power equals torque times angular speed. Check the result with the horsepower calculator or the torque calculator.