Horsepower Calculator
Find power from torque and engine speed, or convert a power figure between kilowatts, mechanical (imperial) horsepower and metric horsepower.
| Mechanical horsepower | 270.3 hp |
|---|---|
| Kilowatts | 201.59 kW |
| Metric horsepower | 274.1 PS |
Link to this calculation – copied!
Formula
P (hp) = τ (lb·ft) × n (rpm) ÷ 5,252
1 hp = 745.69987 W, 1 PS = 735.49875 W
| Symbol | Meaning |
|---|---|
| P | Power |
| τ | Torque |
| n | Rotational speed, in revolutions per minute |
| 9,549 | 60,000 ÷ 2π, converts N·m × rpm into kilowatts |
| 5,252 | 33,000 ÷ 2π, converts lb·ft × rpm into horsepower |
How to Use This Calculator
- Choose the Calculate from (Torque (N·m) and rpm, Torque (lb·ft) and rpm, A known power figure).
- Enter the Torque (N·m).
- Enter the Engine speed (rpm).
- Enter the Power when Calculate from is A known power figure.
- Choose the Power unit (Kilowatts (kW), Mechanical horsepower (hp), Metric horsepower (PS, CV), Watts (W)) when Calculate from is A known power figure.
- Fields change to match your selections above, so only the values needed for that choice are shown.
- Press Calculate. Results also update automatically as you type.
Worked Example
Using the values pre-filled in the calculator above:
| Calculate from | Torque (N·m) and rpm |
|---|---|
| Torque | 350 N·m |
| Engine speed | 5,500 rpm |
| Mechanical horsepower | 270.3 hp |
|---|---|
| Kilowatts | 201.59 kW |
| Metric horsepower | 274.1 PS |
About This Calculation
James Watt coined the horsepower in the 1780s to market his steam engines, defining it as 33,000 foot-pounds of work per minute (550 ft·lbf per second), roughly what he judged a strong mill horse could sustain. In SI terms one mechanical horsepower is about 745.7 W. Continental Europe adopted a slightly different metric horsepower, 75 kilogram-force metres per second or 735.5 W, known as PS in Germany, CV in France and Italy, and pk in the Netherlands. One PS is about 0.986 hp.
Engines do not measure power directly; a dynamometer measures torque at a known speed, and power is torque times angular velocity. In imperial units this becomes hp = lb·ft × rpm ÷ 5,252, which is why torque and horsepower curves on a dyno chart always cross at 5,252 rpm. In metric units, kW = N·m × rpm ÷ 9,549.
Manufacturers today usually quote power in kW, with hp or PS alongside. "Brake horsepower" is measured at the crankshaft; "wheel horsepower" measured on a chassis dyno is typically 10–20% lower because of drivetrain losses. Electric motors are often rated in kW for continuous output, with a higher peak figure available for short bursts.
Frequently Asked Questions
- How many kW is 1 horsepower?
- One mechanical horsepower is 0.7457 kW, and one metric horsepower (PS) is 0.7355 kW. So 100 kW ≈ 134.1 hp ≈ 136 PS.
- Why do torque and horsepower cross at 5,252 rpm?
- Because hp = lb·ft × rpm ÷ 5,252, the two numbers are equal exactly when the engine speed is 5,252 rpm. This only applies when torque is in lb·ft and power in hp.
- How do I convert electrical power to horsepower?
- Find the power in watts with the electrical power calculator, then convert. Note that the electrical horsepower used for motor ratings is defined as exactly 746 W.